+86 25 52164810 sales@suntech-metal.com
Views: 0 Author: Site Editor Publish Time: 2022-10-24 Origin: Site
The application areas of separation technology are diverse and therefore require extremely different solutions. Now we will introduce the characteristics, use, and installation of the zirconium separator.
Here is the content list:
What are the characteristics of the zirconium separator?
How to install a zirconium separator?
How to maintain a zirconium separator?
1、Small footprint of the product, large processing capacity, and high effective rate.
2, easy to adjust in operation, simple operation.
3, high degree of automation.
4、Save late-running cost
The first step is to install the wire tube, which is installed on the street host and fastened with a steel pipe card to prevent it from falling off.
The second step, the other end of the zirconium separator in the hydraulic transfer pump to install the feed pipe, and then in the connection of the drainage pipe, so that the installation of the pipe is complete.
The third step, connect the electricity, solid-liquid separator connected to the electricity must be the main power switch off, connect the cable is to pay attention to the color of the cable, different colors correspond to different parts of the power cord (red for the external power supply, blue for the host power, yellow for the pump power.
The fourth step, adjust the counterweight iron, adjust the position of the counterweight iron can adjust the wet and dry separation of dry humidity.
The fifth step, familiar with the function of the control panel of the solid-liquid separator of each button, is to operate the zirconium separator.
The Sixth step, test run the solid-liquid separator to see if the dryness and humidity of the separated particles are up to standard.
1, there should be a fixed person responsible for the care, the operator must have a certain level of technology. Separator in the installation of the operator before the necessary technical training, so that they understand the principle of the performance of the separator, familiar with the operating procedures to maintain zirconium separator.
2, to make the separator normal, the price of the separator should be developed equipment "equipment maintenance safety operation system" to ensure the long-term safe operation of the separator, as well as the necessary maintenance tools and grease and the corresponding accessories. Share from Chanba ecological zone filter treasure machinery.
3, the separator after some time, should be overhauled, while the grinding roller grinding ring shovel and other wearing parts to repair and replace treatment, grinding roller device before and after the use of the connecting bolts and nuts should be carefully checked to see if there is a loose phenomenon, the lubricating grease is added enough.
4, grinding roller device use time more than about 3 months to replace the grinding roller, the roller set of rolling bearings must be cleaned, the damaged parts should be replaced promptly, refueling tools available manual fuel pump and grease gun.
It is the responsibility of each manufacturer to produce a zirconium separator that meets the standards, to ensure the safety of the electricity supply and the healthy development of the cable market. Nanjing Shengde metal equipment Co., Ltd. conducts many tests on zirconium pressure vessels for connection before they leave the factory, and the quality qualification rate is guaranteed. If you are in the zirconium pressure vessel business, you can consider our cost-effective products.
